EUROSTAR

  • Type
    Aluminium profile spirit level
  • Technical characteristics
    Anodized profile
    Cross section approx. 50 x 22 mm
    Wall thickness 1.5 mm

ALUSTAR

  • Type
    Aluminium profile spirit level
  • Technical characteristics
    Anodized profile
    Cross section approx. 50 x 22 mm
    Wall thickness 1.6 mm up to 120 cm in length
    Wall thickness 2.2 mm at least 150 cm in length

SUPERSTAR

  • Type
    Aluminium profile spirit level
  • Technical characteristics
    Powder coated profile
    Cross section approx. 50 x 22 mm
    Wall thickness 1.8 mm up to 120 cm in length
    Wall thickness 2.3 mm at least 150 cm in length
    Milled measuring surface

ROBUST

  • Type
    Aluminium profile spirit level
  • Technical characteristics
    Powder-coated profile
    Cross section approx. 60 x 26 mm
    Wall thickness 2 mm
    Torsion-resistant 4-chamber profile
    Two milled measuring surfaces

HIGHPRECISION

  • Type
    Aluminium profile spirit level
  • Technical characteristics
    Anodized profile
    Cross section approx. 75 x 26 mm
    Wall thickness 2 mm
    Torsion-resistant 4-chamber profile
    Vials with a high degree of sensitivity

CONSTRUCT

  • Type
    Aluminium profile spirit level
  • Technical characteristics
    Powder-coated profile
    Cross section approx. 50 x 22 mm
    Wall thickness 1.2 mm
    The welcome model for cost-aware users.

ULTRASONIC

  • Type
    Aluminium profile spirit level
  • Technical characteristics
    Anodized profile, Wall thickness 1.8 mm
    Length 20 und 25 cm
    Cross section approx. 50 x 22 mm
    Optimally visible vertical bubble tube
    with a magnet

POLYWOOD

  • Type
    Spirit levels made of composite materials
  • Technical characteristics
    Wood-plastic composite spirit level
    "non-sparking tool"
    "fully insulated up to 1000V according to EN60900:2004"

WOODEN SPIRIT LEVEL

  • Type
    Wooden spirit level
  • Technical characteristics
    made of hardwood
    Cross section 56 x 26 mm

666

  • Type
    Aluminium cast spirit level
  • Technical characteristics
    Trapezoidal shape
    Powder-coated body
    Milled measuring surface

665 S

  • Type
    Aluminium cast spirit level
  • Technical characteristics
    Rectangular
    Powder-coated body
    Cross section 58 x 28 mm
    milled all around

689 R

  • Type
    Aluminium cast spirit level
  • Technical characteristics
    Rectangular
    Powder-coated body
    Cross section 48 x 25 mm
    milled all around

LEVELTRONIC

  • Type
    Electronic level
  • Technical characteristics
    Spirit level with electronic inclinometer
    Anodized profile
    Cross section approx. 50 x 22 mm

LEVELBOY

  • Type
    Electronic level
  • Technical characteristics
    Water scale with electronic inclinometer
    Body made of glass fibre reinforced plastic
    Dimensions L x W x H: approx. 200 x 45 x 75 mm
    with a variety of mounting options

Incli Tronic plus

  • Type
    Electronic level
  • Technical characteristics
    Spirit level with electronic inclinometer
    robust power-coated 4-chamber profile
    Cross section 60x26 mm

Angle of inclination

  • Type
    Special purpose level
  • Technical characteristics
    Heavy die-cast aluminium version
    Milled measuring surface
    Powder-coated body
    Length 50 cm

INCLIFIX level inclination angle

  • Type
    Special purpose level
  • Technical characteristics
    built on an anodized aluminium profile
    Length: 60 cm

Transmission level

  • Type
    Special purpose level
  • Technical characteristics
    Steel body
    prismatic base
    scraped contact surfaces
    available in different degrees of sensitivity

POCKET

  • Type
    Plastic bubble level
  • Technical characteristics
    High-impact plastic level
    Rectangular
    Dimensions: 100 x 35 x 13 mm

NIVELLE

  • Type
    Plastic bubble level
  • Technical characteristics
    High-impact plastic level
    prismatic surface
    with circular bubble used for aligning posts
    Dimensions: 150 x 25 x 23 mm

LINE-LEVEL

  • Type
    Plastic bubble level
  • Technical characteristics
    High-impact plastic level
    used as a levelling line
    with circular bubble used for aligning posts
    Dimensions: 120 x 29 x 17 mm

TRIVELLE

  • Type
    Plastic bubble level
  • Technical characteristics
    High-impact plastic level
    Torpedo-shaped
    comes with a magnetic strip in the measuring surface
    Dimensions: 200 x 42 x 17 mm

INKLINAT

  • Type
    Plastic bubble level
  • Technical characteristics
    High-impact plastic level
    Additional rotating vial to transfer inclinations
    Dimensions: 255 x 55 x 19 mm

UNIVERSAL

  • Type
    Plastic bubble level
  • Technical characteristics
    High-impact plastic level
    Additional rotating vial to transfer inclinations
    equipped with two strong disk magnets
    Dimensions: 250 x 54 x 15 mm

TORPEDO

  • Type
    Plastic bubble level
  • Technical characteristics
    Level made of glass fibre reinforced plastic
    Torpedo-shaped
    Round vials allow good readability
    equipped with two strong disk magnets
    Dimensions: 250 x 43 x 22 mm

Vials

  • BMI vials
    individually available in
    different versions

689 WL

  • Type
    Straight-edge
  • Technical characteristics
    Straight-edge made of aluminium profile
    No vial
    Cross section approx. 100 x 18 mm

689 RL

  • Type
    Straight-edge
  • Technical characteristics
    Straight-edge made of aluminium profile
    with 1 horizontal and 1 vertical vial
    Cross section approx. 100 x 18 mm

689 RS

  • Type
    Straight-edge
  • Technical characteristics
    Straight-edge made of aluminium profile
    with 1 horizontal and 1 vertical vial
    with hand holds for easy handling
    Cross section approx. 100 x 18 mm

689 HK

  • Type
    Trapezoid-shaped profiles
  • Technical characteristics
    made of the so-called H-profile
    or special applications
    with reinforcement bead
    Cross section approx. 114 x 27 mm

689 TK

  • Type
    Trapezoid-shaped profiles
  • Technical characteristics
    Trapezoid-shaped aluminium profile
    Trapezoidal shape
    Cross section approx. 98 x 18 mm

689 RL-EL screeding level

  • Type
    Straight-edge
  • Technical characteristics
    Straight-edge made of aluminium profile
    one horizontal vial
    extra thick base 4 mm
    Box section approx. 83 x 18 mm

Videos

  • BMImeter
  • Highprecision
  • Winkelstar
  • Nautilus IPX7
  • TopoMat
Video page

Downloads

  • Retail catalogue
  • Promotional items catalogue
  • Technical documentation
  • Logos
Go to Downloads

BMI Messzeuge

  • Bayerische Maßindustrie
  • A. Keller GmbH
  • Rosengasse 12
  • DE-91217 Hersbruck, Germany
  • Phone (national): 09151 7301-0
  • Phone (intl): +49 9151 7301-49
Go to the Contact Page